Description
Product Description
VCE RJ45 Shielded Cat6A Keystone Jack
- The VCE Cat 6A shielded metal RJ45 Keystone Jacks are ideal for 10GBASE-T channel compliant networks up to 100m.
- The 110-type terminations are color-coded with both T568-A and T568-B wiring schemes.
- Included IDC caps offer tool-free or impact tool termination options.
- The standard keystone face size fits patch panels or wall plates with standard keystone blanks.
- Compatible with 22-26 AWG solid or stranded, shielded STP/FTP cable.
What You Get
- 6 x VCE CAT6A Shielded Keystone Jack
- 6 x cable tie.
- 1 x Quick Installation Guide.
- You can get replacement for free if quality problem.
180 Degree Wide-Angle Design for 22 to 26 AWG Cable
- Robust full metal construction against electromagnetic and radio frequency interference (EMI/RFI) and alien crosstalk.
- IDC modules compatible with 110 tool and color-coded with both T568-A and T568-B wiring schemes.
|
|
|
|
|---|---|---|
Quality Construction
|
Easy to Use
|
Shielded Cat6A Applications
|
DSarge –
Risque de problème si mal montéCe type de connecteur nécessite une attention particulière lors du montage. Les fils doivent être coupés très près du rebord de plastique, car sinon, ils touchent la partie extérieure en métal et occasionne des problèmes de connectivité. Par ailleurs, j’ai dû dénudé les fils pour un meilleur contact avec le connecteur. Le plastique qui retient le connecteur à la plaque murale casse très facilement.
Yogi –
Good design, but needs quality controlOverall, I really like these keystone connectors. I’ve worked with other CAT6A models before, but this one is a lot easier and has better strain relief. No need for a punch-down tool and fairly easy to re-open if you made a small error.The few (minor!) cons that I witnessed:1) one of the covers had a broken (hinge) pin. The pin (tiny piece of metal) was loose in the bag, so could’ve found its way behind the contacts and caused an issue. When I first found the piece, I had no clue what it was for. Finally the last connector in the bag I noticed it had the isolation cover loose. But in all fairness: after assembly, it feels secure enough, so can’t tell that it has a hinge pin missing.2) the zip ties are really low quality, I broke 2 simply with my bare fingers when trying to tighten them. Glad I have a life-time reserve of zip ties at home in all sizes.3) one of the connectors had a cap on which the colour coding was printed amidst some ink issues. Couldn’t make sense of it. So I had to use another cap next to it to avoid mistakes.4) I wish the metal body had a small film of isolation on the insides. The wire ends shorten with the outer body. Luckily that’s an easy fix with electrical isolating tape (of which I also have a huge supply), but it would overall look/feel less messy if it would’ve been manufactured into the product.I would probably buy this again though.
Carrie –
Good pieces except 2 little thingsThis product is very easy to use if you know that you might need either to cut the end very very close the the plastic or you put a piece of electric tape over the cut wires(see picture).That way, you wont have a short circuit, since the end wont touch the casing.I found that when my 6 connectors where installed and my tester showed bad behavior, it did not follow the proper 1 through 8 has normal, it was flashing all over the place.I would recommend in the future if they can isolate the casing.Also, the cable tie is very cheap, so I used mine.
Alarmguy –
Not worth itAwful don’t waste your moneyFirst of all, the shield is not grounded, so what’s the pointSecond, the space is far too limited and the clamps which hold the wire are weak. If you do manage to getcthe conductors in place, they will most likely fall out
Ben McIntosh –
AwesomeEasy to use good quality cheep for Cat6a stuff
Roberto Cruz –
Rj45Good value
Colin Drummond –
Does the job for 1gigWorks well so far.
Matthew –
Easy to Install and Certify.I have been looking for this style of STP Cat6A jack for a while. I am glad I finally checked Amazon. These connectors provide a quick easy termination solution for a 10GB signal that is tricky to certify when used with Cat6A STP bulk cable for your infrastructure installations. These are also slim in style and easily fit in to our existing keystone patch panels and plates.I will be buying more for future projects. Thank you VCE.
the good doctor –
An assessment to comeRe-evaluating the product … please stand by