Description
The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans, for silent operation. The device has a “Dual boot” feature that allows you to choose between two operating systems – RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price, providing the best price/performance on the market.
wesley weiss –
Cheapest SFP+ switch you can get, also extremely low wattageI have a home lab I wanted to run 10gig SFP+ between a couple servers. I could have gotten a larger enterprise switch but I find them extremely loud, power hungry, and had way more features than I was ever going to use. I got this guy, it’s silent, it does what it says on the tin, and I was able to hook the “management” gig-e port into the copper part of my network as an uplink. Would definitely buy again.
Antoine –
Handle 10gbps as expectedHandle 10gbps as expected. Nice webUI. Can’t tell much about functionnality as I used it only for more SFP+ ports in my network but it sure does it’s job great and quiet!
DUBOISFX –
WOW! Best 10GB EVER!Simple put… BUY ONE!1 – 1gb Port for Internet Connection4 – 10gig Ports for Network.The 4 x10gig ports auto-switch speed up/down depending how fast your network is.. 10gig, 5gig, 2.5gig etc.
Steve Broadhead –
10GB affordableLooks well made – worked right away out of box (Not yet played with VLAN and other specialized options)IT colleagues praise MikroTik. Would but again.
Amazon Customer –
BienBien mais l’interface de configuration n’est pas intuitive.
scotty –
nice fiber swith for the moneywill work well for my network thanks
Frank –
Vorsicht, Fehlerstrom bei neuer Revision!UPDATE: Ich habe weitere Tests durchgeführt. Die neueren Revisionen verwenden auch ein anderes Netzteilmodell, aber die Verwendung des alten Netzteils bringt leider keine Verbesserung (also wurde vermutlich im Innenleben des Switches etwas geändert). Ich habe jetzt ein Netzteil mit Erdungskontakten gekauft (ASIN B07WMRXRNR), damit liegt endlich kein Fehlerstrom mehr am Gehäuse an (und wird dorthin abgeleitet, wo er hingehört).Ich verwende eine alte Revision dieses Switches schon seit Ende 2019 – ein gutes Gerät zu einem unschlagbaren Preis.Jetzt wollte ich ein zweites Gerät, aber damit gibt es ein massives Problem: Am Gehäuse liegt ein deutlich spür- und messbarer Fehlerstrom an. Also habe ich eine Rücksendung veranlasst und den Switch von einem anderen Händler erneut bestellt. Auch der andere Switch hatte das gleiche Problem.Der Fehlerstrom ist heftig: Kommt der Switch in Berührung mit meinem HDMI-Switch (ebenfalls Metallgehäuse), dann “stirbt” der HDMI-Switch und muss komplett resettet werden. Beim Versuch den Fehlerstrom über das Erdungskabel abzuleiten entstehen deutliche Lichtblitze.Das ist weit über der tolerierbaren Grenze und dürfte so niemals die Qualitätskontrolle verlassen.Die Seriennummern der fehlerhaften Switche beginnen mit B9E90C bzw. B9E90D, beim fehlerfreien Modell mit B9E90B.
M –
Great value 10g L2 switchIt’s a dirt cheap 10g switch that doesn’t have fans, and you can even power it with PoE! What’s more to say?OK the os is pretty nasty and using any sort of feature that requires software processing (i.e. anything L3) kills performance dead, but don’t try to be silly and it’s just incredible value. Just be aware it does run very hot, especially if you’re planning on using 10gbase-t. Make sure it can breathe!
Dado –
Klein, günstig, performant auch über CAT5, konfigurierbar, warm bis heiss 🙂Moin,habe zwei von den Dingern, um zwei Zimmer mit 10Gbe zu verbindenPositiv:Klein,günstig,performant,konfigurierbar, wenn nötig4x sfp+ Ports 10GBe, die natürlich auch sfp könnenSehr schön, dass über 20 Meter relativ billiges CAT5! (fünf) Kabel, dass bereits lag und bisher 1Gbe übertragen hat, eine stabile 10Gbe Verbindung hergestellt wirdnegativ:je nach Anzahl mit RJ45 Transceiver bestückten Ports (habe hier bei einem 1x und beim anderen 2x “QSFPTEK 10GBASE-T SFP+ Kupfer RJ45 Modul Transceiver Kompatibel für Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, D-Link, Supermicro, TP-Link, Linksys, andere offene Schalter, up to 30m ” drin, werden die Dinger schon verdammt warm, da die Tranceiver halt relativ viel Leistung verbraten. Ein passives DAC im Port ist da temperaturtechnisch natürlich im Vorteil…Ich habe testweise mal einen Kühlkörper (100 mm (L) X 69 mm (B) X 36 mm (H)) auf dem mit 2 RJ45 Transceivern stehen. Der passt genau da hin, wo keine Lüftungslöcher sind. Erstmal ohne Wäreleitpaste oder ähnlichem. Das ganze in einem offenen Schrank (wo zwar viel Platz drumherum ist, aber kein Luftzug). Ich kann den Kühlkörper gerade noch anfassen…
Audrey Spina –
For the price, you cannot do better. 10Gb switch powered over PoE.I have only dipped my toes into the features of this switch. To be fair I only wanted a 10Gb capable switch so a dumb on would have been fine, but this is incredibly capable.My situation:-I have a 1Gb PoE switch for cameras and access points. I wanted to upgrade to 10Gb to access video files I’m rendering more quickly. I wanted a mix of fiber, DAC and CAT6.This switch fits my needs perfectly. The flexibility is a huge selling point. The 1Gb Ethernet port connects to my PoE switch for both power and data transfer. Optical SFP+ for the longer cable runs and DAC from switch to my PC, and then 10Gb copper to another laptop.One thing you’ll need to do to get 10Gb is go into each port and set the advertise to 10Gb. I’m guessing this is not enable out of the box for compatibility reasons but it is no great hardship to go in and set it.It runs hot. But I can see that the power draw is currently 7.9Watt. I need to shove some high speed transfers over it and then I’ll report back.Seriously though…. The sheer amount of options in the GUI for this switch is unreal. Enterprise features, layer 1,2 and 3 features.In terms of compatibility this is again very versatile. I bought 10GTek optical transceivers, QSFPTEK RJ45 1Gb, and a passive DAC. All work immediately. I was really concerned about all the moving parts and compatibility but it all just works.FYI I use Solarflare 7120 cards for two client devices and the 10GTek optical trancievers and passive DAC and it all works together. I did a transfer between two NVME shared and got 580MB/s transfer speeds. I have yet to set any of the options above links advertising speed, so this is very promising.£120 for 10Gb switching? No brainer. So happy with this device, and it has some many more features I’ve barely even scratched the surface of.